eCombo 3.5" SATA/PATA to eSATA/USB 2.0 External Enclosure

ecombo-SL ecombo-RD ecombo-BU ecombo-BK

INTRODUCTION

The eCombo 3.5" SATA/PATA to eSATA/USB 2.0 Hard Drive Enclosure is the best solution for users who want to upgrade their hard disk from PATA(Parallel ATA) to the newest HDD technology-SATA (Serial ATA) interface and still can use the same USB 2.0 enclosure. Not only the USB interface also the eSATA interface will be included on the eCombo enclosure while using the SATA HDD then just a slide switch be switched then you will have two benefits: either a> Most popular and convenient USB interface to your hard disk or b> The best data access performance without any data interface change delay.

The eCombo external enclosure that converts any 3.5" PATA/SATA hard disk drive into a 480M bits/sec Hi-Speed USB 2.0 or direct connects the SATA HDD and gets 1.5G bits/sec(SATA I) or 3.0 G bits/sec(SATA II, Phase II) performance (The computer needs to have eSATA external ports).

Plug & Play and hot swappable, the eCombo hard drive enclosure is the perfect way to add extra storage to your laptop or desktop computer or users who do not want the hassle of installing a new hard drive without opening the computer case!

 

FEATURES
  • Ideal for 3.5" PATA and SATA HDD.
    Fanless design.
  • One USB2.0 port, one eSATA port.
  • Converts 3.5" PATA/SATA hard disk drives into Hi-Speed USB 2.0 or SATA to eSATA external hard drives.
  • Supports all 3.5" PATA/SATA hard disk drives of any capacity.
  • Hi-Speed USB 2.0 transfer rates up to 480M bits/sec.
  • SATA transfer rates up to 1.5G bits/sec or 3.0G bits/sec (depend on the SATA HDD type).
  • Plugs & Plays and be hot-swappable.
  • USB 1.1 and USB 2.0 compatible.
  • Hard drive activity light for indication.

Specifications
  • Interfaces: Serial ATA, USB 1.1/2.0.
  • Compliance with Gen1i, and Gen 1m of
  • Serial ATA II Electrical Specification 1.0.
  • Support SATA II Asynchronous Signal Recovery (Hot Plug) feature.
  • Support 480Mbps High Speed (HS) and 12Mbps Full Speed USB operation.
  • LED indicators: Front- Power, HDD activity
  • Case material: Aluminum
  • Weight: 3 Ibs./ I .36 Kg
  • Dimensions: 1.4 A " H x 8.3" L x 54.7' W
    210.5mmL x 119.5mmW x 38.5mmH
  • Environmental:
    . Power Requirements: 110-220 VAC, 50-60 Hz, 12V/ 2A , 5V/ 2A .
    . Operating Temperature: 5 o C to 50 o C
    . Storage Temperature: -40 o C to 70 o C
    . Operating Humidity: 5 to 90 %, non-condensing

System Requirements
PC : Mac :
  • 233 MHz Pentium ll or higher
  • Serial ATA: Windows 98SE/ME/2000/XP
  • USB 2.0: Windows 98SE/ME/2000/XP
  • USB 1.1: Windows 98SE/ME/2000/XP
  • Computer must have proper port or PCI card
  • USB 2.0: Mac OS 10.2 or higher
  • USB 1.1: Mac OS 9.1 or higher (Must update the USB extension to v1.41 or higher between Mac OS 8.6 and Mac OS 9.04)
  • Computer must have proper port or PCI card

Package Contents

  • One eCombo 3.5" PATA/SATA HDD to eSATA /USB 2.0 External Enclosure.
  • One 3 feet A-male to B-male USB2.0 cable.
  • One 3 feet eSATA Cable
  • USB driver for windows ME/98 SE
  • AC adapter with power cord
  • User's Manual
  • Screw kit for installing hard drive
Reallyuseful Electronics Inc.
www.reallyuseful.com.tw
goya@reallyuseful.com.tw
Office : 11F, NO. 266, SEC. 1, Wenhua Road, Banciao Div., New Taipei City, Taiwan
Factory : Nan Fang Industrial area, Beizha, Humen, Dongguan city, Guantung province, China
Tel : 886-2-2257 0555 ( Rep. )  Fax : 886-2-8251 0609
HDD Case Series,2.5" HDD Case,3.5" HDD Case,1.8" HDD Case,5.25" Lan disk, 3.5 SATA, HDD Case,Card Reader Series,Card Reader Series,Internal Card Reader Series,USB HUB Series,PCI CARD,PCMCIA CARDBUS,KVM SWITCH Series,VGA SPLITTER Series,USB Adapter Seriers, IRDA, BLUETOOTH SERIAL,Adapter/cable series,Accessories,CABLES Series,USB CABLES,LFH CABLES,SCSI CABLES,MULTIMEDIA CABLES,COMPUTER CABLES,ADAPTERS,KVM CABLES,POWER CABLES,FLAT RIBBON CABLES,reallyuseful,really,useful, really useful